SBC6410 Highligts:
   · Source Code for Android2.0, WinCE6.0 and Linux2.6.28   · Processor: Samsung S3C6410, ARM1176JZF-S, up to 667MHz.
   · 128MB Mobile DDR SDRAM, 266MHz, Samsung K4X51163PC
   · 256MB SLC NAND Flash, Samsung K2F2G08, 1G Nand Flash optional
   · 2M Bytes NOR Flash, AMD AM29LV160DB
   · 1 EEPROM, support I2C, it can be soldered with AT88SC016 for encryption
   · SDIO WIFI Module, supporting IEEE802.11b/g
   · LCD/Touch Screen interface. Supporting 3.5" TFT LCD, 4.3" TFT LCD,7" TFT LCD and 10.4" LCD
   · Many modules are available for your choice- GPS, WIFI, Camera, USB HUB+4x4 Matrix Keyboard, USB 3G Modem.
   · GPIO ,ADC, SPI,IIC, I/O, Interrupts and MMC are in 2 2x20 pin header
   · One audio input interface (3.5mm audio jack)
   · One 2-channel audio output interface (3.5mm audio jack)
   · One 100M Ethernet interface (RJ45)
   · One USB2.0 Host port (USB A/F type interface)
   · One USB2.0 Device port (Mini USB type interface)
   · Four serial ports (Two are five-wire interface, another two are three-wire TTL serial interface)
   · 2 SD/MMC interface (supports 3.3V and 1.8V logic voltage)
   · Camera interface (10x2 pins header, supporting the mode of ITU-R 601/656 8bit) 
   · One 5x2 pins JTAG interface
   · Seven buttons (Reset, Boot, User defined, On/Off)
   · One TVOUT
   · Board Dimension: 116.6 x 76.8 x 17mm   · Power supply: +12V

SBC6410 Description:

SBC6410 is based on Samsung S3C6410 - an advanced ARM11 CPU for running operating system and application code, and for dedicated video processing. Low voltage Mobile DDR enables very low power consumption in regular operation and in standby. For embedded applications,the SBC6410 provides a general purpose local bus, 100Mbit Ethernet, serial ports, I/O lines and other essential functions, while integrated WiFi interface implement industry standard wireless connectivity.The small size and low power consumption of the SBC6410 allows its integration into hand-held and mobile devices, while its low price makes it an ideal selection for cost-sensitive applications.The SBC6410 delivers a price / performance ratio significantly better than that of any other platform.
Software:
OS
Item
Feature
Description
Linux2.6.28
Bootloader
u-boot
u-boot-1.1.6 Main functions:1. Supporting Nand Flash erase/write/read2. Supporting USB download Image3. Supporting print, set, save Environment Variables4. Supporting memory 's contents display/compare/modify5. Supporting bootm, bootargs setting
Sdboot
1. SD Card boot-up and download Image via USB (can replace JTAG)2. Replace booting LOGO
Image update
Supporting Image update from SD Card or USB
Kernel and drivers
Version
Linux 2.6.28.8
File system Format
ROM/CRAM/EXT2/EXT3/FAT/NFS/JFFS2/UBIFS
Drivers
DDR RAM, Nand Flash, Serial ports, RTC, Ethernet, 3.5",4.3" ,7" and 10.4"LCD including Touch Screen, MMD/SD, USB Host, LEDs, AC97, Camera, USB Keyboard and Mouse, IIC, SPI, WAVEDEV, DMA,JPEG, MFC, TVOUT, OpenGLES1.1&2.0, D3DM
File System
File System
Yaffs or NFS File System
Function
Provided Lib (ALSA -lib, tslib, glibc), udev support
Embedded GUI
Qtopia 2.2.0
Support file browser, Mediaplayer, Calendar, time, counter, Touch Screen Calibration program, Plug-in manager.
Network protocol
& application
Network protocol
TCP/IP protocol, Telnet, FTP Client/server, Boa webserver
Application
H.264 display, MPEG-4 display, H.263 display, VC-1 display, 4-windows display, Camera preview & MFC encoding, MFC decoding & Camera preview, Camera input and JPEG encoding, JPEG decoding and display, MFC decoding & Camera preview thru TV, H.264 decoding thru TVOUT
Cross compiler Environment
3.3.2 , 3.4.1 , 4.3.3-eabi
WinCE6.0
Boot
Stepldr
Providing Source code and STEPLDR.bin
Eboot
Providing Source code and EBOOT.binEboot main functions:1. Ethernet download: Set static IP, HDCP gets Dynamic IP, Mac address setting, download kernel automatically by Ethernet when the system starts.2. USB download: update the image via USB OTG 2.03. Format Nand Flash4. Format BinFS5. Low-level Format6. Set boot-up delayed time7. Booting process bar
Sdboot
1. SD Card boot-up and download Image via USB (can replace JTAG)2. Replace booting LOGO
System
Driver
1. 3.5" ,4.3" ,7" LCD,10.2" and 10.4" (LVDS) including Touch Screen, TVOUT, LEDs2. Supporting 16/18/24Bpp3. Supporting LCD display rotate
SD card, High speed SD card, SPI, AC97, Camera, Ethernet, USB Host, USB Device, Serial ports, RTC,GPS, WIFI,IIC,JPEG, SPI,Keyboard, NandFlash, wavedev, CF_ATA, CMM, DMA, DrvLib, MFC, Powerbutton, Powercontrol, UA0
Function
220MB NAND Flash for user
Power Management (backlight drive, battery-driven, sleep/wake-up function), Hive registry support, ROM file system support
Application
MFC VideoEncode/decode
Providing Source Code and user manual, supporting MPEG-4/H264/H263/VC-1 and API operation manual
DirectShow Filter
Providing Source Code including:AACDecoderFilter, FrameExtractFilter, MFCDecoderFilter, MP4testcode, mpeg4ip_mp4v2, SsapMP4Parser
JPEG
JPEG/JPG encoding and decoding, providing driver and test program.
OpenGL
OpenGL ES1.1&2.0, providing source code and user manual
Camera
Supporting CMOS Image sensor-ov9650/9653/9655
TCPMP
Hardware decode MPEG-4/H263/H264/VC-1, supporting avi,mp4, m4v, mov, 3gp, flv, MPG.Supporting DIVX, XVIDSupporting MP1, MP2, MP3, AC3, AAC more audio kinds.
OFFICE
Word, Excel, PowerPoint, PDF,txt, Skype
Android-2.0
Boot
Version
U-boot 1.1.6
Boot Mode
Boot Android from SD card, NAND Flash
Image update
Support updating image from SD card or USB
Kernel         and  drivers
Version
Linux 2.6.29-Android
Drivers
DDR, Flash, Serial ports, RTC, 4.3" and 7" LCD including Touch Screen, MMD/SD, High Speed SD card, user buttons, DM9000, IIC,SPI, keyboard, WAVEDEV, DMA, USB device, JPEG, MFC, TV OUT, Rotator, OpenGGES1.1 & 2.0, D3DM
Application
Alarm Clock, ASTRO, Mediaplayer, Music, Picsay, Gallery, Browser, Panda Reader
File System
File System     Format
Yaffs2 (Androidfs-sdk-m5-rc15)
Embedded GUI
Android-2.0Support file browser, Mediaplayer
Cross compiler Environment
Arm-none-linux-gnueabi
Debug Tools
DNW,MoviNAND_Fusing_Tool.exe

Downloads:   . PCB Dimension.pdf
   . ARM11 S3C6410 Datasheet

SBC6410 Single Board Computer Contents:   . One ARM11 SBC6410
   . One CD-ROM (WinCE 6.0 BSP, Linux BSP, Documents, tools, Schematic Drawing, datasheets)
   . One Serial cable (IDC10-to-DB9)
   . One 12V@2A Power adapter
   . One USB cable
   . One Cross Ethernet cable